Dr. Hesham Mohamed El-Batsh|Publications

Benha University

Staff Search: Go

You are in:Home/Publications
Prof. Dr. Hesham Mohamed El-Batsh :: Publications:

Research Fields

flow

turbine

turbine cascade

complex pipeline

particle deposition

turbine blade

numerical study

Number of publications is 54

Title

1-Experimental and numerical investigation for PV cooling by forced convection

Abstract' | Full paper

2- Passive Flow Separation Control in Linear Compressor Cascade, October 2019, Novel Intelligent and Leading Emerging Sciences Conference (NILES)

3-Effect of waste cooking oil methyl ester jet A-1 fuel blends on emission and combustion characteristics of a swirl stabilized lean pre-vaporized premixed flame, Fuel 267, 117203, 2020.

4- Performance of Impulse ventilation system in an underground car park fire: case study, Journal of Building Engineering, 29, 2020. 101161.

5-Experimental and numerical investigations of pressure loss and 3-D flow separations in a linear compressor cascades, 10686, International Mechanical Engineering Congress & Exposition, November 11 – 14, 2019, Salt Lake City, Utah

6- Investigations of three-dimensional flow field development in an axial compressor cascade, 11047, International Mechanical Engineering Congress & Exposition, November 11 – 14, 2019, Salt Lake City, Utah

7-Effect of Wind Tunnel Blockage on the Performance of a Horizontal Axis Wind Turbine with Different Blade Number, Energies 2019, 12(10), 1988.

8-Froude scaling modeling in an Atrium Fire equipped with natural and transient forced ventilation, International Journal of Ventilation, 2019

9-Numerical simulation of an experimental atrium fires in combined natural and forced ventilation by CFD, International Journal of Ventilation, 2019, 1-24

10- Numerical study for the flow field and power augmentation in a horizontal axis wind turbine, Sustainable Energy Technologies and Assessments 31, 2019, 245-253

11-flame and emissions characteristics of waste cooking oil- jet a-1 blend of 20% using lean pre-vaporized pre-mixed combustion technique, Proceedings of ICFD13, Thirteenth International Conference of Fluid Dynamics 21-22 December, 2018, Cairo, EGYPT

12-The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics, Fuel 224, 147-166, 2018.

13-Numerical study of the effect of changing the cyclone cone length on the gas flow field, Applied Mathematical Modelling, vol. 46, 2017, pp. 81–97.

14- CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications, Journal of building engineering, 2016, page 274-300

15-Experimental and Numerical Investigation for the Aerodynamics of a Linear Compressor Cascade, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt

16-Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt

17-Studying of heat transfer and fluid flow characteristics, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt

18-Effects of alumina nanoparticles additives into jojoba methyl ester-diesel mixture on diesel engine performance, ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-39988, November 14-20, 2014, Montreal, Canada

19-Combustion characteristics of jojoba methyl ester as an alternative fuel for gas turbine, accepted for publication at ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-39991, November 14-20, 2014, Montreal, Canada

20-Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, accepted for publication at ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-38547, November 14-20, 2014, Montreal, Canada

21-Experimental and numerical investigation of the radiant panel heating system using scale room model, Energy and Buildings 82, 130–141, 2014.

22-An investigation on the effect of endwall movement on the tip clearance loss using annular turbine cascade, International Journal of Rotating Machinery, 2011, Article ID 489150, 11 pages.

23-Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-38547, November 14-20, 2014, Montreal, Canada

24-Effect of secondary flows on heat transfer of a gas turbine blade, International Journal of Rotating Machinery, Volume 2013, Article ID 79784

25-Improving cyclone performance by proper selection of the exit pipe, Applied Mathematical Modelling, vol. 37, pp. 5286-5303.

26-Three Dimensional Heat Transfer Characteristics through a Linear Gas Turbine Cascade, Journal of Engineering Sciences, Faculty of Engineering, Assiut University, pp. 947-970.

27-Experimental and numerical investigation of a condensation repellent radiant cooling panel system, Accepted for publication at the Journal of Engineering Sciences, Faculty of Engineering, Assiut University, Vol. 40, No. 4

28-Effect of squealer tip on the aerodynamic losses downstream of an annular turbine cascade, accepted for publication at Mansoura Engineering Journal, Vol. 37, No.1, M24-M39.

29-Effect of the radial pressure gradient on the secondary flow generated in an annular turbine cascade, International Journal of Rotating Machinery, 2012, Article ID 509209, 14 pages

30-On the application of mixture model for two-phase flow induced corrosion in a complex pipeline configuration, Applied Mathematical Modelling, Vol. 36, 2012, pp. 5686–5699.

31-Numerical and experimental aerodynamic investigation on shrouded wind turbines and estimation of power generation, Bulletin of the Faculty of Engineering, Faculty of Engineering, Minia University. Vol. 31, No.1

32-Effect of exit pipe on the flow and particle separation in tangential inlet cyclone separators, Bulletin of the Faculty of Engineering, Faculty of Engineering, Minia University. Vol. 31, No.1

33-Prediction of Hydrogen Sulfide Corrosion in Petroleum Refinery Complex Pipelines, ICFD10-EG-3063, Tenth International Congress of Fluid Dynamics, December 16-19, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt

34-A study of the loss generated due to the tip clearance flow downstream of an annular turbine cascade, ICFD10-EG-3056, Tenth International Congress of Fluid Dynamics,December 16-19, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt, 2010

35-Effect of the tip clearance gap on the flow and loss mechanism through a linear turbine cascade, ICFD10-EG-3055, Tenth International Congress of Fluid Dynamics

36-Prediction for the mass transfer and oxygen corrosion in complex pipelines, ICFDP9-EG-271, Proceedings of ICFDP9, Ninth International Congress of Fluid Dynamics & Propulsion,

37- Prediction for the mass transfer and oxygen corrosion in complex pipelines, Proceedings of ICFDP9, Ninth International Congress of Fluid Dynamics & Propulsion, December 18-21 Alexandria, Egypt.

38- Hydrodynamic investigation of two-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference, March 6-8.

39- Heat transfer and fluid flow around semi-circular tube in cross flow at different orientations, Heat and Mass Transfer, vol. 43, pp. 1157-1169, .

40-Hydrodynamic investigation of single-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference, March 6-8,

41-Hydrodynamic investigation of two-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference

42- An experimental and numerical study of the tip clearance effect on the three-dimensional flow field through a linear turbine cascade, Eighth International Congress of Fluid Dynamics & Propulsion, Sharm El-Shiekh, Egypt, December 14-17 .

43- Numerical and experimental study of the flow field and particle dynamics through cyclone separators, ASME/ATI Conference on Energy: Production Distribution and Conservation, Milan, Italy, May 14-17.

44- Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions, 4th International Engineering Conference, Mansoura-Sharm El-Shiekh, April 20-22, 2004 and published also at Journal of Turbulence, Volume 7, No. 5.

45-Experimental and numerical study of the flow field and forced convection around semi-circular tube in cross flow at different angles of attack, Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 40, No. 2, June 30.

46- Numerical and experimental prediction of secondary flow through a rectilinear cascade for different aspect ratios, International Mechanical Engineering Conference, Kuwait, December 5-8.

47-Effect of gas and surface temperatures on particle deposition on turbine blades. Fourth European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, Florence, Italy, March 20 - 23.

48-Effect of particle deposition on the performance of turbine blades. Projekte an den Zentralen Applikationsservern 2000, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 139 – 148.

49- Effect of turbulence modelling on particle dispersion and deposition on compressor and turbine blade surfaces. ASME Paper 2000-GT-519, ASME TURBO EXPO 2000, Munich, Germany.

50- Modelling Particle deposition on compressor and turbine blade surfaces. Projekte an den Zentralen Applikationsservern 1999, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 185 – 194

51-Modelling particle deposition on compressor and turbine blade surfaces. Projekte an den Zentralen Applikationsservern 1998, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 163 – 172

52- Steam generator mathematical model and its application on practical data, The Eighth International Conference for Mechanical Power Engineering, Alexandria University, Alexandria, Egypt, April 27-29

53- Reducing tip leakage flow by modifying the tip geometry of a turbine blade, accepted for publication at the scientific Bulletin, Faculty of Engineering, Ain Shams University.

54-Effect of Elbows on the Flow through Complex Pipeline Configurations, Part 1: Single-Phase Flow, submitted for publication at the Computer and Fluids.

Google Scholar

Acdemia.edu

Research Gate

Google Plus

Youtube

Wordpress

Instagram

Mendeley

Zotero

Evernote

ORCID

Scopus