Mahmoud Abdelrahman Khedr|Publications

Benha University

Staff Search: Go

You are in:Home/Publications
Dr. Mahmoud Abdelrahman Khedr :: Publications:

Research Fields

Steel

Micro-structure characterization

Mechanical twins

Dislocation

Hydrogen embrittlement

Al-alloys

Friction stir drilling

Number of publications is 18

Title

1-Effects of Wall Thickness Variation on Hydrogen Embrittlement Susceptibility of Additively Manufactured 316L Stainless Steel with Lattice Auxetic Structures

Abstract' | Full paper

2-Metallurgical analysis of ASME SA213 T12 boiler vertical water-wall tubes failure

3-Microstructural evolution and mechanical performance of two joints of medium-Mn stainless steel with low-and high-alloyed steels

4-Optimization of Thermal Drilling Parameters of 6082 Al-Alloy Based on Response Surface Methodology

5-Review on the Solid-State Welding of Steels: Diffusion Bonding and Friction Stir Welding Processes

Abstract' | Full paper

6-Metallurgical characterization of a failed A106 Gr-B carbon steel welded condensate pipeline in a petroleum refinery

7-The effect of pre-drilling on the characteristics of friction drilled A356 cast aluminum alloy

8-Effects of increasing the strain rate on mechanical twinning and dynamic strain aging in Fe-12.5 Mn-1.1 C and Fe–24Mn-0.45 C–2Al austenitic steels

9-Strengthening Contributions of Mechanical Twinning and Dislocations to the Flow Stress of Hadfield High-Manganese Steel: Quantitative Analysis

10-Study on the Mechanical Performance of Dissimilar Butt Joints between Low Ni Medium-Mn and Ni-Cr Austenitic Stainless Steels Processed by Gas Tungsten Arc Welding

Abstract' | Full paper

11-Studying the distribution of hardness values in friction drilled 7075 Al-alloy sheets at different conditions

Abstract' | Full paper

12-Investigation of temperature variation during friction drilling of 6082 and 7075 Al-alloys

Abstract' | Full paper

13-Investigation of exhaust valve failure in a marine diesel engine

14-Evolution of Fracture Mode in Nano-twinned Fe-1.1C-12.5Mn Steel

15-Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties

Abstract' | Full paper

16-Improving hydrogen embrittlement resistance of Hadfield steel by thermo-mechanical flash-treatment

Abstract' | Full paper

17-Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5 Mn-1.2 C Austenitic Steel

Abstract' | Full paper

18-The effect of deformation twins induced previously by cold rolling on the mechanical behavior of Hadfield steel

Abstract' | Full paper

Google Scholar

Acdemia.edu

Research Gate

Google Plus

Youtube

Wordpress

Instagram

Mendeley

Zotero

Evernote

ORCID

Scopus